Water Leak Detection System

This is the master panel. It supervises the system, communicates with slave modules, and gives alarms.

Features: 230 V AC supply, battery backup, touch-screen or LCD to display module number + distance to leak.

Outputs: Modbus for BMS integration, common alarm relay, common hooter, built-in sounder.

Supports up to 32 slave modules via RS-485.

Slave / Interface Module

Digital Addressable Water Leak Detection System-

  • Supply Voltage230V AC – 50Hz +/- 10 %
  • LCD DisplayBacklit
  • Max. Cable length150 meters
  • Relay Type LeakCommon Relay output
  • AudibleSounder for Alarm
  • External Hooter24VDC
  • Fuse2 Amp

Water Leak Detection Module

Digital Addressable Water Leak Detection Panel

  • Availability3 Kgs Approx
  • Supply Voltage230V AC – 50Hz +/- 10 %
  • Dimensions250(H) X 250(W) X 110(D) mm.
  • LCD DisplayBacklit.
  • Internal SounderBuzzer to indicate alarm and fault.
  • External SounderHooter 24V DC.
  • Fuse1 Amp

Water Leak Detection Touch Screen Conventional Panel

The WD-AS sensing cable is laid out in areas prone to leaks (under floor, around piping, near AC units, etc.) because it senses water anywhere along its length.

Slave (MD-450) Modules:

  • These modules are installed locally (in different rooms / zones). They connect to the sensing cable. When water is detected on the cable, the module reads it and sends data to the master panel.

Addressable Water Leak Detection Control System Image perseption

MOdbus connection for efficient communication..